TOPENS TC102 Safety Photocell Infrared Beam Sensor Photoelectric Motion Detector for Automatic Swing Sliding Gate Openers Garage Door Openers Access Control Security Alarm Systems Indoor Outdoor Use

Price: $29.00
(as of May 25, 2024 09:32:07 UTC – Details)

Product Description

Works with All the TOPENS Gate Openers

TOPENS TC102 Photo Eye Beam Sensor is an outdoor photoelectric sensor with rapid response. It is strongly recommended to use the TC102 photo eye beam sensor with automatic gate opener system to ensure multiple protection & security.

Why Choose TOPENS?

Founded in 1998, TOPENS is one of the America’s well-known and trusted consumer brands in gate automation industry.

TOPENS is always committed to providing the high-quality products as well as the most helpful service. When you have our products, you also get the favorable 12-month war-ranty, life-time tech guidance, and free system consultant service.

We have a knowledgeable, talented team of technicians to assist you with all of your questions and troubleshooting.

TOPENS TC102 PHOTO EYE BEAM SENSOR – HIGHLIGHTS Reliable Reversing Sensor

The emitter is designed to generate an infrared light beam.The receiver is used to detect any interruptions.TC102 creates a safety barrier that identifies any movement between the emitter and receiver. Once the infrared beam is blocked, it perfectly makes the gate stop or reverse automatically.Commonly used for the household, courtyard, farm, ranch, warehouse and other commercial / industrial sites. IP44 Waterproof for Outdoor Use

The infrared ray of TC102 is immune to strong light interference, such as sunlight and vehicle headlights. At the same time, most of the family light also will not affect the infrared sensor of TC102.Weather resistant for all seasons of the year.Working Temperature: 0°F to 120°F (-20℃~ +50℃) Simple Wire Connection

Connect both the receiver and the emitter to the gate opener system. Please refer to the corresponding User Manual for the correct wire connection.Connect the emitter to the gate operator system or receiver with a 2C x 22 AWG cable. Connect the receiver to the gate operator system with a 4C x 22 AWG cable. Cables are required but NOT included.It is highly recommended to install the emitter 10 feet (3m) to 46 feet (14m) away from the receiver. Easy DIY Installation

Power on to determine the emitter position. The photocell status LED turns off indicating that the beam is aligned. Ensure that there is no obstruction between the receiver and the emitter during alignment.It is suggested to mount the photocell sensor at least 8″ (20cm) above the ground. The distance between the sensor and the control board should be within 65 feet (20m).One TC102 photocell sensor can only work for one gate operator, while one gate operator can connect two TC102 at most.

Breakdown Drawing

1. Mounting Hole

2. Alarm Indicator Light

3. Power Light

4. Wire Terminal

5. Wire Hole

For Other Brands’ Gate Openers

Accepts “Normal Open or Normal Close Dry Contact” signal.

Powered by the control board or by the external 12-24VDC or 12-24VAC power source.

Photocell Dimension

3 x 1.9 x 1.2” (75 x 48 x 30 mm)

Help

Choose TOPENS accessory, visit our website to download the user manual, watch the installation video and enjoy consultant service directly.

What Is the Specification of the TC102 Photo Eye Beam Sensor?

● Wave Length: 940nm ● Response Time: 10ms (Max)

● Frequency: 1.92 KHz ● Output: Relay SPDT

● Angle: <10° ● Operating Voltage: 12-24VDC / VAC

● Rated Current: RX 15mA – TX 30mA

● Output Capacity: 1A max 30V

Do I Need to Add Solar Panels if the Gate Operator System Is Only Solar Powered?

If the beam sensor is powered by the gate opener system during both working and standby modes, please add 30W solar panels or more and upgrade the battery capacity (NOT incl.) to at least 17 Ah or higher to meet the power consumption.

What’s in the Box?

1 x Photocell Beam Sensor (One Emitter and One Receiver)

1 x Mounting Accessories

1 x TOPENS User Manual

Comparison of TOPENS Safety and Access Control Accessories

Power Supply

12-24VDC / VAC

Power Supply

12-30VDC / 10-25VAC

Power Supply

12-24VDC / VAC

Compatibility

All TOPENS gate openers or most third party (accept “NO/NC Dry Contact” signal)

Compatibility

All TOPENS gate openers or most third party (accept “NO/NC Dry Contact” signal)

Compatibility

Most TOPENS gate openers or third party (accept “NO Dry Contact” signal)

Wire Connection

Connect both the receiver and the emitter to the gate opener system

Wire Connection

Connect the retro-reflective photocell to the gate opener system

Wire Connection

Wire directly to the control board of the gate opener system

Applications

Gate openers, garage door openers and access control system

Applications

Gate openers, garage door openers and access control system

Applications

Gate openers

Dimension

3×1.9×1.2” (75x48x30 mm)

Dimension

Photocell: 4.5×2.6×2.6” (115x65x65 mm); Reflector: 3.6×3.5×1.8” (92x90x45 mm)

Dimension

Diameter 2×18.1” (52×460 mm)

Access & Control

TC196 Tuya WiFi Remote Control (Asin: B0CGR6XX62)M12 Remote Control (Asin: B075L4BN21), ERM12 External Receiver (Asin: B075KHPLHD)TC188 Universal Keypad (Asin: B09VGTCCJQ), TC175P Wired Keypad (Asin: B07ZTB33JK), TKP3 Wireless Keypad (Asin: B075K783DS)HLR01 Homelink Remote Control Kit (Asin: B07CWNX1P8), TEW3 Vehicle Sensor Exit Wand (Asin: B07DF8ZQNB) Push Buttons & Power Supply

TC148 Waterproof Wall Push Button (Asin:B09VGKDNQL), TC147 Wired Push Button (Asin: B07ZTB2TQH), TC173 Wireless Push Button (Asin: B07ZTC75CX)TSP30W 30W Solar Panel Charging Kit (Asin: B07ZTBRVXL), TSQ20W 24V 20W Solar Panel Kit (Asin: B09PH859S5), TCS3 Solar Charge Controller (Asin: B07ZTC6317)UPS01 Uninterrupted Power Supply (Asin: B093GF6DM7), DPS180-U AC-DC Power Supply (Asin: B07DF8HQV3), TS24-U Adapter (Asin: B07CWNP9R6) Safe & Security

ET24 Electric Gate Lock (Asin: B07NKQH8H3)TRF3 Reflection Photocell Sensor (Asin: B07ZTCMWFT), TC102 Photo Eye Beam Sensor (Asin: B07ZTB4VML)JD24VY DC 24V Warning Light (Asin: B07ZTB326B), JD110VY AC 110V Warning Light (Asin: B07ZTB175Z) Cable, Chain & Gear Racks

25FT Extension 5-Conductor Cable (Asin: B07WCW6W8T)LT08B 20 Feet Roller Chain (Asin: B07ZTBD6JZ)PYCGZT Limit Switch Magnet (Asin: B0BXNCG9S2)SR02 Heavy Duty Steel Gear Rack (Asin: B08HRXRVKW), RNH2 Heavy Duty Nylon Gear Rack (Asin: B093FCGDM7), RNH4 Heavy Duty Nylon Gear Rack (Asin: B078TCZ7TT)

Reliable Infrared Sensor – TOPENS TC102 Photo Eye Beam Sensor is a photoelectric sensor that uses infrared light to detect the presence or absence of objects. It creates a safety barrier that identifies any movement between the emitter and receiver. Once the infrared beam is blocked, it perfectly makes the gate stop or reverse automatically. It is strongly recommended to use the TC102 IR beam sensor with automatic gate opener system to ensure multiple protection & security.
Clever Design – The infrared photocell sensor consists of two components: an emitter and a receiver. The emitter is designed to generate an infrared light beam. The receiver is used to detect any interruptions. This non-contact sensing technology provides high detection accuracy with a fast response. In addition, the infrared beam sensor is immune to strong light interference, such as sunlight and vehicle headlights. Weather resistant for all seasons of the year.
Wide Compability – Works with all the TOPENS gate openers, and compatible with most third party swing / sliding gate opener or garage door opener whose control board accepts “Normal Open or Normal Close Dry Contact” signal. It can be powered by the control board of the gate opener or by the external 12-24VDC or 12-24VAC power source. This security infrared sensor is commonly used for the household, courtyard, farm, ranch, warehouse and other commercial / industrial sites.
Easy DIY Installation – Connect both the receiver and the emitter to the gate opener system. It is suggested to mount the photocell sensor at least 8″ (20cm) above the ground. Power on to determine the emitter position. The photocell status LED turns off indicating that the beam is aligned. Fix the emitter position when the status LED goes off. Ensure that there is no obstruction between the receiver and the emitter during alignment.
Customer Service and Technical Support – All the TOPENS products come with a 12-month war-ranty against defects, a 30-day worry-free exchange & return and lifetime tech support. Visit TOPENS website for the user manual, installation video, and personalized service. TOPENS is ready to offer professional solutions for any questions or assistance. Enjoy an easier and smarter life by ordering other TOPENS accessories.