QDenglamp.Motion Sensor Light Switch PIR Sensor Smart Detection Time Delay Adjustable Infrared Induction Detector for Strip LED Ceiling Lamp (110V-265V)

Price: $12.50
(as of May 18, 2024 04:40:26 UTC – Details)

Product Description

Product description

There are three photosensitive modes and delay time to be selected to meet the needs of lighting under various conditionsSelect a suitable position for installation according to the sensing range and angle of the product to avoid being insensitive or unable to sense due to exceeding the range

Wiring mode of the product

Attention

The above includes two wiring methods. It should be noted that the maximum power carried by this product is less than 40W. Exceeding this power will cause the product to fail to operate normally

Installation diagram

Installation method of low voltage option （5V-24V）

For the low-voltage model, you need to ensure that your output voltage is 5v-24v. If you exceed this value, the product will be damaged

Installation method （110V-265V）

This option requires a household voltage with a normal output of 110v-265v. A low or high output voltage will cause the goods to fail to work normally

Effect description of product induction

Daytime

In the daytime or when there is enough light, the induction will not be triggered if there is someone or no one passing by（Except under the option of Allday）

Nighttime

It can be sensed normally at night. After the personnel leave, the light will go out automatically according to the time delay you set. When someone passes by again, the induction will be triggered again

Nighttime

In the case of insufficient light at night, the lamp will not turn on automatically when there is no similar human characteristics, and will only turn on when it senses the human body

Nighttime

If someone stays still in the sensing area for a long time, the switch will also turn off the light according to the set delay.It doesn’t mean that if people are always within the sensing range, the lights will be on all the time

Places where the product is suitable for use

Corridor

Garage

Staircase

Porch

Two voltages are available: 5V-24V and 110V-265V; Load Power :≤40W ；Best sensing distance:3-5M ; Mounting Hole Diameter:25mm/0.98inch
Red line is Live wire (L); the outermost blue line is Neutral wire (N);Yellow line and inside blue line connect to light bulb or energy-saving lamp（Note: the 5V-24V option can only be used if it is connected to a transformer）
Auto switch on/off in the dark when you enter into the induction range, and the time delay has 3 way of 15 seconds, 45 seconds, 5 minutes adjustable
In addition to the automatic control of LED lights, it can also be used to control exhaust fans, doorbells or other devices.