Topping DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC Audio Decoder DSD512 DAC AMP NFCA Headphone Amplifier Pre Amplifier (Silver)
$199.00
Price: $199.00
(as of May 24, 2024 05:22:24 UTC – Details)
Product Description
Adapt to different usage scenarios, DX3Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier.
Connect the Bluetooth of the phone, tablet or notebook to DX3Pro+, and connect the power amplifier, active speakers or headphones to the DX3Pro+’s output, then DX3Pro+ becomes your Bluetooth Headphone amp / Bluetooth DAC. You can easily enjoy the high quality music and convenience brought by Bluetooth 5.0. If your device supports LDAC transmission, you will get even better experience.
Whether it is I0S device, Android device and media player, as long as it supports OTG external sound card, it can be connected to the USB input of DX3Pro+ to make DX3Pro+ be their external high performance DAC.
DX3Pro+ has a simple Pre-amp function that you can use to adjust the volume. The digital volume adjustment will not has any imbalance between the left and right channels.
Pre-amplifier function
Bluetooth headphone amp /Bluetooth DAC application
High performance DAC for media player mobile phones and tablets
DAC+Pre-amplifier application
DAC application
When you only need a simple DAC, you can set DX3Pro+’s output mode to be DAC,then it could served as a simple DAC,screen will display current sampling rate and volume will keep outputting 2Vrms.
Bluetooth 5.0 LDAC transmission
DX3Pro+ has the certification of Hi-Res Audio Wireless and LDAC.
It uses newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LI /APTX HD protocol.
To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode.
Plug and play, turn your PC into a HIFI source
DX3Pro+ uses 2nd generation 8 core XMOS XU208,
USB supports up to PCM 32bit768kHz and DSD512 native.
DX3Pro+ also has a wide range of compatibility:
Windows 10, MAC, Linux, IOS, Android can be plug and play. Even in the face of higher end ASIO applications,
DX3Pro+ can do a good job: MAC drive free, Win10 with customized Thesycon ASIO driver, PC becomes a professional HIFI source.
NFCA Circuit
The new DX3Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion.
It pairs with high sensitivity lEMs and power hungry high impedance headphones nicely.
32ohm load: 1 800mW x2| 300ohm load: 250mW x2
Two gain settings
DX3Pro+ provides two gain settings, which greatly expands the range of headphone adaptation.
Lo Gain+6dB
Hi Gain+19dB
SPEC:
USB IN PCM 44.1kHz-768kHz/16Bit-32Bit DSD(Native) : DSD64-DSD512 DSD(Dop) : DSD64-DSD256 COAX/OPT IN PCM 44.1kHz-192kHz/16Bit-24Bit DSD(Native):Not support DSD(Dop) :DSD64 BT IN AAC/SBC/ APTX/APTXLL/ APTX HD/LDAC DSD(Native):Not support DSD(Dop):Not support Size 12*16.5*4cm
Bluetooth 5.0 LDAC transmission :DX3Pro+ has the certification of Hi-Res Audio Wireless and LDAC. It uses newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode.
NFCA circuit :The new DX3 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely.
Pre-amplifier function :Adapt to different usage scenarios, DX3 Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier.
PA3s is the best power amplifier for DX3 Pro+: PA3s has RCA+TRS balanced inputs. When used with DX3 Pro+, the TRS balanced input can be used to input other audio sources. The output power of 80W x 2@4Ω, 10%THD+N, 65W X 2@4Ω, 1%THD+N can be adapted to most situations where speakers are used.
Bluetooth headphone amp / Bluetooth DAC application: Connect the Bluetooth of the phone, tablet or notebook to DX3 Pro+, and connect the power amplifier, active speakers or headphones to the DX3 Pro+’s output, then DX3 Pro+ becomes your Bluetooth Headphone amp / Bluetooth DAC. If your device supports LDAC transmission, you will get even better experience.
User Reviews
Be the first to review “Topping DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC Audio Decoder DSD512 DAC AMP NFCA Headphone Amplifier Pre Amplifier (Silver)”
![Topping DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC Audio Decoder DSD512 DAC AMP NFCA Headphone Amplifier Pre Amplifier (Silver)](https://m.media-amazon.com/images/I/413xEa016VL._AC_SL1200_.jpg)
$199.00
There are no reviews yet.